Admix Dispensers
Admix Dispensers model no [VAC- Admix- Dispensers]
Days
Hours
Mins
Secs
VSKU:
Introduction
The dispenser is filled with admix using the AC-151 control. Then operate the AC151 control in the MANUAL mode or activate the DISCHARGE HOLD feature for the first few dispensing cycles. This will allow sufficient time between the fill and discharge cycles to check the dispensing fittings for air or liquid leaks. Repair any leaks before operating the dispenser in production. If there are no leaks, proceed to the discharge cycle. The procedure should be repeated at least 3 times. At the end of the discharge cycle, the material level in the measuring unit should be at the zero points of the graduated measuring strip. If it is not, adjust the zero point setting. To do this, loosen the locknut at the top of the zero probes, move up or down as required. When the proper setting has been achieved, tighten the zero probe lock nut.
Applications of Admix Dispensers model no [VAC- Admix- Dispensers]
Features of Admix Dispensers model no [VAC- Admix- Dispensers]
Applications of Admix Dispensers model no [VAC- Admix- Dispensers]
It can be used in concrete production
Features of Admix Dispensers model no [VAC- Admix- Dispensers]
It is available with manual, semi-automatic, or computer interface
It is available with 1, 2, 3, or 4 product dispensers
It is available with electric or pneumatic pumps
We supply Admix Dispensers that can be used in various industries and applications in the United Arab Emirates. Contact us for this Admix Dispensers in Dubai, Abu Dhabi, Sharjah, RAK, UAQ, Ajman & Fujairah too.
This is a preview of the recently viewed products by the user.
Once the user has seen at least one product this snippet will be visible.
Once the user has seen at least one product this snippet will be visible.
Recently viewed Products
To install this Web App in your iPhone/iPad press 
and then Add to Home Screen.
